Detail Study of the Modern Compact Blowroom
Basic operations in the blow room:
Tratzehler blendomat:
Place the bales directly on the floor within the marked working areas on both sides of the blend met BDT and remove the wrapping in the compact blowroom. If any bale exceeds a height of 1700 mm, remove the layers above this level. You can stack these layers in the gap between two bales or use them to feed the waste feeder or pre-mixer. Align the bales either longitudinally, transversely to the rail track, or alternate between the two. Arrange the bales to make the best use of the working width of the detacher and ensure they remain stable and do not fall over.
Multi-mixer mpm:
The second blending concept is the multi-mixer MPM. It is available with 6.8 or 10 chamber. The tufts are once again fed into the machine by a fan The filling procedure and control of the flaps are identical to the working of the multi-mixer MCM The difference between the two lies in the direct suction of the blending channel underneath the opening rolls: there is no conveyor belt. The multi-mixer MPM works on the basis of a closed air circulation.
Trutzchier cleanomat system:
The cleanomat system consists of different cleaners with the same structure
Depending on the application requirements, the manufacturer equips the cleaner with 1, 3, or 4 cleaning rolls. They keep as many machine and control components identical as possible to simplify maintenance and reduce the need to stock a large number of spare parts.
Cleanomat CVT 1:
The cleanomat CVTI with a coarse fully-spiked roll is the first cleaner with gripped beating in a line. Apart from separating coarse and medium-sized trash particles it opens the cotton to a great extent.
The degree of opening ideally matches the feeding requirements of a fine cleaner in the line.
Dedusting machine duster ds:
Efficient removal of dust and micro-dust requires the cotton to be sufficiently opened. To achieve this, the dedusting machine Ducte de is placed after fine opening and always before card feeding. The most comprehensive dedusting is achieve it in combination with a preceding cleasomal clemer. Doe to the small number of moving parts the duster ds requires linle maintenance and has a high level of operational reliability
Foreign matter separator:
The Securomat SCF integrates directly into the duct between the bale work-off and cleaning stages, eliminating the need for an additional feeding condenser.Four video cameras constantly check the fibre flow and a computer analyses the pictures instaneously. If the system detects a foreign body, such as a fragment of polypropylene, a flap further down the line expels the particle from the fiber flow.The high velocity results in only a minimal loss
Blendomat Bo-A
Blendomat Bo-A is flexible in operation. 1-3 groups of Bales can be freely allocated to 1-3 lines. No problem with bale height varying. Three qualities of cottons can be fed into 3 separate lines. For intimate blending, Blendomat can process simultaneously. This can be do on one or both sides. The detachable head, in this case, moves to the other side at the end of its journey.
visit link
